• Move Run/Stop switch to the "Run" position. | Note: If the engine fails to start after 3 pulls, primethe |
| engine three (3) times and pull starter rope again. |
| Once the engine has started, disengage the spray |
| gun safety latch. |
•Pressthe primerbulb three (3) times, waiting two
(2) secondsbetween each push.
HOW TO STOP YOUR CLEANING SYSTEM
•Move the Run/Stop switch to the "Stop" position. Simply shutting off the engine will not release pressure in the system. Squeeze trigger on the spray gun to relieve pressure in the hose.
Note: A small amount of water will squirt out when you release the pressure.
•Rotate the
OFF position to prevent chemical leakage.
SIPHONING
DO NOT siphon standing water for yourwater supply. Contaminated, brackish or dirty water can damage the pump. Connect only to householdwater supply.
•Grasp starter handle and pull slowly untilyou feel some resistance.Then pull cord rapidlyto overcomecompression,prevent kickbackand start the engine. Let rope retum to starter slowly.
Note: The Pressure CommandTM may be placed in
any positionduring staring or operation.However, for cold starts, it is recommendedthat the Pressure
CommandTM be placed in the Uhigh"position.
TIPS
Never use the garden hose inlet to siphon detergent or wax.
If you hold the spray nozzle too far away from the object being cleaned, washing will not be as _' effective.
•Always store the cleaning system with the Dial-
