43
8 Maintenance
Insert the empty drip tray and coffee grounds container
back in the machine.
The cleaning operation is now complete. The Maintenance
symbol h flashes, the IMPRESSA heats up and is once again
ready for use.
You can initiate the “Cleaning the machine” operation manually.
Start when the first prompt appears l, as described under “Cleaning
following a prompt”.
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the degree of hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
Avoid contact with the skin or eyes.
Rinse the descaling agent off with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the water.
Use only original JURA care products.
If the descaling operation is interrupted, it is possible that the
machine could be damaged.
Allow the descaling program to run to the end.
If the descaling agent comes into contact with sensitive surfaces, the
possibility of damage cannot be excluded.
Clean up any splashes immediately.
The descaling program lasts approx. 40 minutes.
Your dealer will stock JURA descaling tablets.
Try out the “Descaling the machine” operation online. Visit
the Knowledge Builder on www.jura.com.
l
l
l
l
l
l
o
o
@
Manual cleaningManual cleaning
Descaling the machine Descaling the machine CAUTIONCAUTION
CAUTIONCAUTION
CAUTIONCAUTION
CAUTIONCAUTION