Jura Capresso IMPRESSA C5 manual Milk foam

5 Preparing drinks at the touch of a button

l Open the filler funnel for pre-ground coffee.

l Place one level measuring spoon of pre-ground coffee in the filler funnel.

ä l Turn the Rotary Switch to the 1 coffee setting d.

m l Press the Rotary Switch to initiate preparation of the coffee. The symbols for pre-ground coffee j and 1 coffee d will flash, and the pre-configured amount of water will flow into the cup.

Drink preparation stops automatically.

	To prepare two cups of pre-ground coffee, place two cups under the
	coffee spout, add two level measuring spoons of pre-ground coffee
	to the filler funnel, turn the Rotary Switch to the symbol for 2
	coffees f and then press to initiate preparation of the coffee.
Milk foam	Precondition: your IMPRESSA is ready to use, the Easy Cappuccino
	Frother is mounted.
	l Take the milk pipe out of the Welcome Pack.
	l Take the protective cap off the Easy Cappuccino Frother.
	l Attach the milk pipe to the frother.
	l Insert the other end in a milk Tetrapack or connect it to a
	milk container.

l Place a cup under the Easy Cappuccino Frother.

ä l Turn the Rotary Switch so that it points to the Steam symbol k.

m l Press the Rotary Switch to confirm your choice.

The Steam symbol k will continue flashing until the IMPRESSA has warmed up. As soon as the required temper- ature has been reached, the light segment by the switch will flash.

34