40
8 Maintenance
Once the IMPRESSA has heated up following switch-on, the
Maintenance symbol h will light up, prompting you to per-
form a rinse operation. To initiate the rinse operation, press
the Rotary Switch.
When the IMPRESSA is switched off, a rinse operation is auto-
matically performed.
Precondition: the IMPRESSA is ready for use.
Place a receptacle under the coffee spout.
รค l Turn the Rotary Switch so that it points to the Maintenance
symbol h .
m l Press the Rotary Switch to start the rinse operation.
The rinse operation now starts and the Maintenance
symbol h flashes.
Rinsing stops automatically.
Your IMPRESSA is ready for use.
After 50 litres of water have been dispensed, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to replace the filter.
After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
If the CLARIS plus filter cartridge is not activated, you will not
be prompted to change the filter.
To change the CLARIS plus filter cartridge when prompted to do so
by your IMPRESSA, you should proceed as follows:
Precondition: the Maintenance indicator and the Filter indicator n
are illuminated.
Remove the water tank and empty it.
o
o
l
o
o
o
l
Rinsing the machine Rinsing the machine
Changing the filter Changing the filter
Replacement following a
prompt
Replacement following a
prompt