•Reattach the valve cover makingsure the gasket between the valve cover and cylinderhead is in place. Start all four screws before tighteningor you will not be able to get all the screws in place.
•Reattach the breather tube.
•Reattach the spark plug wire to the spark plug.
•Torque the bolts to 4.0
•Torque sequence is as follows: A, B, C, D, E (star pattern).
Retorque Head Bolts
After the first 50 hours of operation,you must retorque the head boltsto 4.0
Important: If you feel uncomfortableabout doing this procedure or you don'thave the propertools, please take your cleaning system in to the nearest service center to have the valve clearance adjusted. This is a very important step to insure the longest life for your engine.
Note: Only perform this adjustmentafter first50 hours of operation. The head bolts will need no further adjustment.
•Remove the four (4) screwsfrom the valve cover.
•Remove the valve cover and gasket.
jE
A
c
15
