FieldServer FS-X20 instruction manual Pre-Installation Check List Supplied equipment, Start-up

Start-up guide

1. Pre-Installation Check List

1.1. Supplied equipment

The following components are supplied:

•FS-X20 Series FieldServer, loaded with

Modbus RTU driver, SMT Ethernet driver and any other drivers ordered.1

•FS-X20 Series Start-up Guide (T17005)

•FieldServer Configuration Manual (T17003)

•FieldServer Utilities Manual (T17009)

•Driver Manual(s) specific to all Drivers ordered with the FieldServer.

•Utility CD – note that the Utilities support the following platforms only:

•Windows XP

•Windows 2000

•Windows NT

•Windows 98

•Any additional Diskettes related to special files configured for a specific FieldServer.

•Additional components as required -. See Driver Manual Supplement for details

•An accessory bag consisting of the following: :

•DB9F/RJ45 Connection Adapter. (Part Number FS-8917-02)

•7-ft Cat5 cable with RJ45 connectors at both ends (Part Number FS-8915-10)

•RS-232 Mini Tester, 25-pin (Part Number FS-8915-13)

•RS-485 connector (Part Number FS-SPA59137)

•Set of four different connectors DB9M, DB9F, DB25M, DB25F (Part Number FS-8915-11)

•Power Supply

•Connector for power (SPA59136)

1.2. Start-up

•Read this Start-up Guide in conjunction

with the Configuration Manual, the

1 Note that a default configuration file has already been loaded onto the FieldServer. Check the Driver Manual and the FieldServer Configuration Manual for further information on this file.

Driver Manual(s) and the Utilities manual.

•

•The power socket mates with a pluggable terminal block, connector, that is supplied separately (SPA59136). The terminal block is manufactured by Phoenix Contact, model MSTB, (PN 1754465), No.30-12 AWG, 5-7 in/lbs torque.

•

•USE COPPER CONDUCTORS ONLY

•Select an external power supply certified for safety, for the correct destination country and an output rating, which is considered a NEC Class 2 circuit or is a SELV Limited power source with the following ratings:

• 9-30 VDC, 1A; OR 24 VAC, 50/60Hz, 0.5A

•

•INPUT VOLTAGE SPECIFICATION

•24 VAC FLOATING

•Using a grounded VAC will cause irreparable damage to the product.

•

•The operating environment for the product is 0 to 60°C (32 to 140°F).

•

•

•

•

Page 2 FS-X20 Series FieldServer Start-up Guide (07-2005)