Appendices29

Appendix A: TV Care, continued

Cleaning Recommendations

Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines:

First, turn off the TV and unplug the power cord from the power outlet.

Exterior

Occasionally clean dust and debris build-up from the air-intake grilles on the back and sides of the TV. Clean using a vacuum cleaner with a brush attachment.

Top and Sides of the TV

•Gently wipe down your TV with a soft, non-abrasive cloth such as cotton flannel, microfiber, or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth.

•For oily dirt, add a few drops of mild liquid deter- gent, such as dishwashing detergent, to the water used to moisten the cloth. Rinse with a second cloth moistened only with water. Dry with a third dry, soft, non-abrasive cloth.

Screen

•Follow the instructions for the top and sides, wiping gently in an up and down motion.

•Clean the entire screen evenly, not just sections of the screen.

•Do not allow liquid to drip down the screen, as some liquid may enter the TV through the gap between the screen and screen frame.

•You may purchase Mitsubishi Screen Cleaner, part number CLEANER-VSS, by calling (800) 553-7278.

General Cleaning Precautions

•DO NOT allow liquid to enter the TV through the ventilation slots or any crevice.

•DO NOT use any strong or abrasive cleaners, as these can scratch the surfaces.

•DO NOT use any cleaners containing ammonia, bleach, alcohol, benzene, or thinners, as these can dull the surfaces.

•DO NOT spray liquids or cleaners directly on the TV’s surfaces.

•DO NOT scrub or rub the TV harshly. Wipe it gently.

Care of the Remote Control

Remote Control Tips

•For longer life, use alkaline batteries.

•Do not mix old and new batteries.

•Be within 20 feet of the equipment.

•Do not press two or more keys at the same time unless instructed to do so.

•Do not allow the unit to get wet or become heated.

•Keep the unit out of direct sunlight.

•Avoid dropping on hard surfaces.

•Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth.

Resetting the Remote Control

If TV mode is selected and the TV does not respond properly, reset the remote control.

1.Press and hold POWER for several seconds until the mode indicator blinks twice and goes off.

2.Release the POWER key.

3.Enter code 0 0 0 0 0 and the POWER key will blink twice when you finish entering the code. When entering the code, pause for a moment between each key press to ensure it is recognized.

Low-Battery Indicator

If you press a key and the mode indicator blinks five times, replace the remote control’s batteries.

For assistance call 1(800) 332-2119

Page 28 Page 30
Page 29
Image 29
Mitsumi electronic C10 SERIES manual Cleaning Recommendations, Care of the Remote Control
Page 28 Page 30

C10 SERIES specifications

Mitsumi Electric, a pioneer in electronic components, has engineered the C10 Series, which stands out for its impressive performance and innovative features. This series represents a leap forward in technology, designed to meet the demands of modern electronic devices, including gaming consoles, consumer electronics, and industrial applications.

One of the primary features of the C10 Series is its compact design. This series has been created with space efficiency in mind, allowing manufacturers to integrate these components into devices without compromising on performance. Despite their small size, the C10 series components are robust, contributing to the overall durability and reliability of end products.

The C10 Series also boasts exceptional energy efficiency. Utilizing advanced technologies, these components consume minimal power while delivering high performance. This feature is particularly beneficial for battery-operated devices, where extended battery life is a critical factor for user satisfaction. By minimizing power consumption, the C10 Series helps manufacturers meet sustainability goals while also enhancing user experience.

Another standout characteristic of the C10 Series is its high-speed data transmission capabilities. This series employs cutting-edge communication protocols and technologies that ensure swift and reliable data exchange between devices. This capability is essential for applications requiring real-time data processing, such as in gaming, multimedia, and industrial automation.

Mitsumi has also incorporated advanced safety features into the C10 Series. These components come with built-in protection mechanisms to prevent overheating and overcurrent, ensuring that devices operate within safe parameters. This safety aspect is crucial for maintaining the longevity of electronic devices and protecting sensitive electronic circuits.

In terms of versatility, the C10 Series is designed to support a range of applications. Its compatibility with various electronic systems makes it suitable for use in automotive electronics, IoT devices, and telecommunications. This adaptability allows manufacturers to utilize the C10 Series across different projects, streamlining production processes and reducing the need for multiple component types.

The C10 Series is a testament to Mitsumi’s commitment to innovation and quality in the electronic components sector. With its combination of compact design, energy efficiency, high-speed capabilities, and robust safety features, the C10 Series is well-equipped to meet the evolving needs of the electronics industry, paving the way for a new era of technology integration.
Top Page Image Contents