Mitsumi electronic C10 SERIES manual Channels, continued, Locks, Additive Scan, Adding a Channel

243. TV Menus

Channels, continued

Additive Scan

The additive scan adds only new channels. Unlike the full channel scan, custom channel settings are pre- served.

1.Highlight Additive Scan and press ENTER to select either ON or OFF.

2.Highlight Scan Channels and press ENTER to start the additive scan.

Adding a Channel

You can manually add a new channel using the Add Channel menu This menu requires you to enter the RF channel number. The RF channel number is available from:

•www.antennaweb.org

•The broadcaster

•Your cable-service provider

Enter the RF channel number using keys on the remote control.

For assistance call 1(800) 332-2119

Locks

PIN

You will be prompted to enter a 4-digit personal identifi- cation number (PIN) when you

•Select Locks on the main menu.

•Try to watch a blocked program

•Tune to a locked channel

Enter your PIN to temporarily unlock the TV and watch the blocked program or channel. Power the TV off and then back on to re-activate channel locks.

Ratings Lock

Rating locks restricts access using ratings sent by broadcasters. There are separate rating systems for movies and television programs. The TV comes from the factory with the rating locks turned off. You must turn on blocking to activate rating restrictions.

TV Ratings

Highlight the rating level you wish to change and press ENTER to block/unblock.

Apply supplemental content blocking to the age-based ratings by using the TV content categories FV, D, L, S, V.

TV Ratings menu