Mitsumi electronic C10 SERIES manual Favorites, Editing the Channel List, Scanning Channels

3. TV Menus 23

Channels

Use the TV’s channel menus to:

•Save a list of favorite channels (see page 10).

•Define the source for the antenna input

•Perform a channel scan

•Limit CH /CH tuning to only the channels you want

•Selectively scan for new channels

•Add a single channel by RF channel number

Favorites

See page 10 for use of the Favorites menu.

Editing the Channel List

•Use the Channel Edit menu so the TV tunes only to the selected channels when using the CH / key.

•Channels marked with a check are in memory.

•Press to move through channel numbers one at a time.

•To add or delete a channel from memory, highlight the channel number and press ENTER to remove the check.

•To jump to a channel, enter the channel number, including separator, and press ENTER. For example,

to jump to 36-1: 3 6 1 ENTER.

•Use the Mark All or Unmark All options if working with many channel numbers.

Enter the channel number to jump quickly to a channel. Checked channels can be tuned with the CH / key.

Changing the Channel Source

Highlight the source connected to the TV’s antenna input.

•Air if you have an over-the-air antenna

•Cable if you have direct cable service without a box.

Press ENTER to confirm your selection.

Scanning Channels

Perform a channel scan after

•Initializing the TV

•Changing the source (switching between an over- the-air antenna and direct cable service)

•Repositioning the antenna

•Transporting the TV to a different area

The channel scan will erase all custom channel settings (channel locks, favorite channels, channel-list edits).

Note: Additive Scan must be OFF to enable a full channel scan.

For assistance call 1(800) 332-2119