28Appendices

Appendix A: TV Care, continued

Lamp-Cartridge Replacement

Removing the Old Lamp Cartridge

1.Turn off TV power and unplug the TV. Allow the lamp to cool for at least one hour before proceed- ing.

2.After the lamp has cooled, remove the cover of the lamp compartment, located on the back of the TV.

Refer to figures 1 and 2. Use a #2 (medium) Phillips screwdriver to loosen the screw securing the cover. Keep the screw and cover for re-installation

3.With a medium Phillips screwdriver, loosen the two screws securing the lamp cartridge until they dis- engage from the mating threads. These are captive screws and cannot be separated from the lamp cartridge.

4.Fully open the bag supplied with the replacement lamp and set the opened bag aside.

5.Gently grasp the handle of the lamp cartridge and pull the old cartridge straight out. See figure 3.

CAUTION: Do not tilt or rotate the cartridge, as small glass fragments may fall out.

6.Without tilting or putting down the lamp cartridge, insert it into the opened bag. Close the bag while being careful not to let any glass particles fall out.

Installing the New Lamp Cartridge

1.Do not touch the glass parts of the new lamp car- tridge. Insert the new cartridge into the TV in the same orientation as the old cartridge. Push on the cartridge housing until it is fully seated.

2.Gently tighten the screws with the screwdriver.

AVOID OVERTIGHTENING!

3.Replace the plastic cover and retaining screws.

4.WASH YOUR HANDS THOROUGHLY, AS THIS LAMP CONTAINS MERCURY.

Figure 1

Figure 2

Figure 3

Use only replacement lamp part number 915B441001.

Disposal of the Old Lamp Cartridge

Lamp under warranty: All lamps replaced under war- ranty must be returned to Mitsubishi. Use the return shipping label provided and send to Mitsubishi Digital Electronics, America, 625 Braselton Parkway, Suite 200, Braselton, GA 30517.

IMPORTANT: Lamps found without defects will be returned and charged back to the sender.

Lamp no longer under warranty: Contact your local authorities or the Electronic Industries Alliance at www.eiae.org for lamp-disposal or recycling instructions.

Do not dispose of the old lamp with common trash.

For assistance call 1(800) 332-2119

Page 27 Page 29
Page 28
Image 28
Mitsumi electronic C10 SERIES manual Lamp-Cartridge Replacement, Removing the Old Lamp Cartridge
Page 27 Page 29

C10 SERIES specifications

Mitsumi Electric, a pioneer in electronic components, has engineered the C10 Series, which stands out for its impressive performance and innovative features. This series represents a leap forward in technology, designed to meet the demands of modern electronic devices, including gaming consoles, consumer electronics, and industrial applications.

One of the primary features of the C10 Series is its compact design. This series has been created with space efficiency in mind, allowing manufacturers to integrate these components into devices without compromising on performance. Despite their small size, the C10 series components are robust, contributing to the overall durability and reliability of end products.

The C10 Series also boasts exceptional energy efficiency. Utilizing advanced technologies, these components consume minimal power while delivering high performance. This feature is particularly beneficial for battery-operated devices, where extended battery life is a critical factor for user satisfaction. By minimizing power consumption, the C10 Series helps manufacturers meet sustainability goals while also enhancing user experience.

Another standout characteristic of the C10 Series is its high-speed data transmission capabilities. This series employs cutting-edge communication protocols and technologies that ensure swift and reliable data exchange between devices. This capability is essential for applications requiring real-time data processing, such as in gaming, multimedia, and industrial automation.

Mitsumi has also incorporated advanced safety features into the C10 Series. These components come with built-in protection mechanisms to prevent overheating and overcurrent, ensuring that devices operate within safe parameters. This safety aspect is crucial for maintaining the longevity of electronic devices and protecting sensitive electronic circuits.

In terms of versatility, the C10 Series is designed to support a range of applications. Its compatibility with various electronic systems makes it suitable for use in automotive electronics, IoT devices, and telecommunications. This adaptability allows manufacturers to utilize the C10 Series across different projects, streamlining production processes and reducing the need for multiple component types.

The C10 Series is a testament to Mitsumi’s commitment to innovation and quality in the electronic components sector. With its combination of compact design, energy efficiency, high-speed capabilities, and robust safety features, the C10 Series is well-equipped to meet the evolving needs of the electronics industry, paving the way for a new era of technology integration.
Top Page Image Contents