1. Setup and Operation | 7 |
TV Controls, continued
TV Control Panel
Buttons on the control panel duplicate some keys on the remote control.
•Refer to lower labels when using TV menus or after activating a special function.
•Refer to upper labels when no TV menus are dis- played.
•SYSTEM RESET. If the TV does not respond to the remote control,
STATUS POWER
65” or 73” TV: Open cover to use buttons on the front panel.
INPUTTypical control panel.
The STATUS Indicator
Key | Off | Steady On | |
| Slow Blinking | Fast Blinking | |
|
|
| |
LED Color | TV Condition |
| |
|
| ||
None | TV is powered off. Normal operation. | ||
|
| ||
|
| ||
Green | TV is powered on. Normal operation. | ||
|
| ||
|
| ||
Green | TV powered off, | ||
Normal operation. TV can be turned on at any time. | |||
| |||
|
| ||
Green | TV just powered off and lamp is cooling. | ||
Sixty seconds after turning off TV, LED will start to blink. TV can be turned back on before blinking | |||
| |||
| starts or after blinking stops, but not while the indicator is blinking. Normal operation. | ||
|
| ||
Amber | TV is too hot. The TV will shut off if it overheats. | ||
|
| ||
•Ambient room temperature may be too high. Turn off the TV and let the room temperature drop.
•Clear blocked air vents. Ensure at least a
Amber | Lamp access door is not secure or no lamp installed. | |
TV will not operate until lamp access door is secured. See Appendix A. | ||
| ||
|
| |
Red | Lamp failure. Replace the lamp. See Appendix A. | |
| ||
|
| |
Red/ | TV may require service. | |
| ||
Amber | • Hold power button on front panel for 10 seconds to reset TV. | |
| • If LED continues to flash red and amber after reset, turn off the TV and unplug it from the AC | |
| power source. Wait one minute and then plug the set back in. | |
| • If LED continues to flash red and amber, go to | |
| receive Authorized Service Center information. | |
| You may be asked to count how many times the LED flashes each color to aid in troubleshooting. |
For assistance call 1(800)
