Appendix
Indicators and Projector Condition
Check the indicators to see the projector condition.
Indicators |
| ||
| WARNING | LAMP | Projector Condition |
POWER | REPLACE |
| |
red/green | red | yellow |
|
|
|
| The projector is OFF. (The AC power cord is unplugged.) |
|
| ✽ | The projector is preparing for |
|
| cooled down. The projector cannot be turned on until cooling is completed. | |
|
|
| |
|
| ✽ | The projector is ready to be turned on with the POWER button. |
|
| ✽ | The projector is operating normally. |
|
| ✽ | The projector is in the Power management mode. |
|
|
| The temperature inside the projector is abnormally high. The projector |
|
|
| cannot be turned on. When the projector is cooled down enough and the |
|
| ✽ | temperature returns to normal, the POWER indicator lights red and the |
|
|
| projector can be turned on. (The WARNING indicator keeps blinking.) |
|
|
| Check and clean the Air filter. |
|
|
| The projector has been cooled down enough and the temperature returns |
|
| ✽ | to normal. When turning on the projector, the WARNING indicator stops |
|
|
| blinking. Check and clean the air filters. |
|
|
| The projector detects an abnormal condition and cannot be turned on. |
|
|
| Unplug the AC power cord and plug it again to turn on the projector. If the |
|
| ✽ | projector is turned off again, disconnect the AC power cord and contact the |
|
|
| dealer or the service center for service and checkup. Do not leave the |
|
|
| projector on. It may cause electric shock or a fire hazard. |
• • • lights green. | • • • blinks green. |
• • • lights red. | • • • blinks red. | • • • off |
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp. See page 50 and 51.
54
