Computer Input
Display area
Select the resolution at the Display area dialog box.
Display area H
Adjusts the horizontal area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SET button.
Display area V
Adjusts the vertical area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SET button.
Full screen
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
Resets all adjustment to their previous levels.
Mode free
To clear adjustment data previously set, move the red frame pointer to the Mode free icon and then press the SET button. Move the red arrow pointer to the Mode that you want to clear and then press the SET button.
Store
To store adjustment data, move the red frame pointer to the Store icon and then press the SET button. Move the red arrow pointer to any of Mode 1 to 5 in which you want to store and then press the SET button.
Quit
Exits the PC Adjust Menu.
✔Note:
Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be selected when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or “1080i” is selected in the PC System Menu (p27).
Press the SET button at the Display area icon and the Display area dialog box appears.
Display area
To store adjustment data
This Mode has parameters being stored.
Vacant Mode | shows values of “Total |
| dots,” “Horizontal,” |
| “Vertical,” “Display area |
| H,” and “Display area V.” |
To clear adjustment data
closes this dialog box.
30
