Polycom CX5500 manual Call from the Dialer, To display the dialer, To place a call from the Dialer

Polycom CX5500 Unified Conference Station for Microsoft Lync User Guide

Call from the Dialer

The dialer displays a list of previously placed calls, as displayed next. To enter a number, tap one of the dialer entries, or start entering a number. As you enter numbers, the Dialer displays a list of similar numbers. Tap a number to enter it automatically.

The dialer displaying a list of previously placed calls

To display the dialer:

»Do one of the following:

From Home view, tap New Call.

From Lines or Calls view, tap the New Call soft key. The New Call soft key does not display if you have an active call.

In Lines view, tap a phone line that does not have any calls.

User Tip: Choosing URLs or numbers mode from the dialer

To enter a URL in the Dialer, tap URL. To exit URL mode and enter numbers, tap Number.

When you access the Dialer during an active call, the call is placed on hold.

To place a call from the Dialer:

»Enter a number, or select a contact and tap .

Note: Automatically-placed calls

Your administrator can set up your phone to place calls automatically after you enter a certain number of digits.

Polycom, Inc. 31