![](/images/new-backgrounds/1224671/22467169x1.webp)
Video Input
Input Source Selection (Component, RGB Scart 21-Pin)
Direct Operation
Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be selected through menu operation as described below.
Menu Operation
1 | Press the MENU button and the | |
| appear. Press the Point 7 8 button to move the red frame | |
| pointer to the Input Menu icon. | |
2 | Press the Point d button to move the red arrow pointer to | |
| Computer 1, and then press the SET button. The Source | |
| Select Menu will appear. | |
3 | Move the pointer to the correct input source and then press | |
| the SET button. | |
| When the input source is coming from video | |
Component | ||
|
| equipment connected to the RGB |
|
| |
|
| COMPONENT IN terminal with a Component- |
|
| VGA Cable, select Component. |
INPUT button
Computer 1
Computer 2 ✳
Video
COMPUTER button
Computer 1
Computer 2 ✳
✳See Note on the bottom of this page.
Input Menu icon
Input Menu
Move the pointer (red arrow) to Computer 1 and press the SET button.
Computer
1
Source Select Menu
Move the pointer to Component or RGB (Scart) and press the SET button.
RGB (Scart)
When the input source is coming from video equipment connected to the RGB
✔Note:
•
•Computer 2 is not displayed when the RGB
Video Input
35