Part Names and Functions

Remote Control Code

This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. (Change the remote control code for the projector first before changing that for the remote control unit. See “Remote control” on page 44.)

1

While pressing the MENU button, press the IMAGE button

 

number of times corresponding to each remote control code

 

number. Each time you press the IMAGE button, the code is

 

changed sequentially. (See the list below.)

2

To initialize the remote control code for the remote control

 

unit, slide the RESET/ON/ALL-OFF switch to the RESET, and

then to the ON. The initial code is Code 1.

Part Names and Functions

Remote Control Code

Number of Times of

Pressing IMAGE Button

 

 

 

Code 1

1

 

 

Code 2

2

 

 

Code 3

3

 

 

Code 4

4

 

 

Code 5

5

 

 

Code 6

6

 

 

Code 7

7

 

 

Code 8

8

 

 

POINTER

MENU button

While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code for the projector.

IMAGE button

Operating Range

Point the remote control unit toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control unit is about 16.4’ (5m) and 60° in front of the projector.

SET

16.4’ (5 m)

60°

Remote Control Unit

13

Page 12 Page 14
Page 13
Image 13
Canon LV-X4 owner manual Remote Control Code, Operating Range
Page 12 Page 14
Top Page Image Contents