Canon LV-X4 RGB IN-1/ Component, Service Port, Video, USB Series B, Computer Audio, Audio OUT

								Part Names and Functions
Terminal	q	w	e		r	t	y	Part
								Names
	RGB IN-1/		AUDIO					and
	COMPONENT IN	R	IN	L	VIDEO IN
	*	SERVICE PORT			S-VIDEO IN	COMPUTER		Functions
						AUDIO IN
		RESET
						AUDIO OUT
		RGB IN-2/
		RGB OUT

ui o

qRGB IN-1/ COMPONENT IN

Connect output signal from a computer (Analog RGB) or video equipment (Component or RGB Scart) to this terminal. Optional cables are required when using this terminal as component input or RGB Scart 21-Pin Video input. (p17.19)

wSERVICE PORT

This jack is used to service this projector.

eAUDIO IN

Connect the audio output from video equipment connected to r or i to this jack. (When the audio output is monaural, connect it to L (MONO) jack.) (p18)

rVIDEO IN

Connect the composite video output from video equipment to VIDEO jack. (p18)

tUSB (Series B)

When operating the connected computer with the remote control unit, connect USB port of your computer to this connector with a USB cable. (p17)

✽A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET

button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

yCOMPUTER AUDIO IN

Connect the audio output (stereo) from a computer or video equipment connected to q or u to this jack. (p17,19)

uRGB IN-2 / RGB OUT

This terminal is switchable and can be used for input from a computer or output to the other monitor. Set the terminal up as either Computer input or Monitor output properly. (Used for Monitor out, this terminal outputs only incoming signal from RGB IN-1/ COMPONENT IN terminal.) (p17,43)

iS-VIDEO IN

Connect the S-VIDEO IN output from video equipment to this jack. (p18)

oAUDIO OUT

Connect an external audio amplifier to this jack. (p17,

18,19)

This terminal outputs sound from AUDIO IN terminal (e or y).

9