Mitsumi electronic C10 SERIES manual Setup, continued, Screen Saver, Timer, Clock, Menu Language

223. TV Menus

Setup, continued

Screen Saver

When on, displays a randomly moving Mitsubishi logo after one minute without activity or a video signal. The logo reminds you that the TV is still on. Press ENTER to choose either On or Off.

Timer

The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the set time, the TV will automatically change to the designated channel or input.

•The TV clock must be set before you can use the Timer feature.

•As a reminder that the TV Timer is set, the STATUS indicator blinks slowly while the TV is powered off.

Clock

Set the clock if you want to

•Use the TV’s auto-on timer.)

•Display current time in the on-screen status.

If Daylight Saving Time is observed in your area, check or uncheck the box when the time change occurs.

1.In the Setup > Clock menu, highlight the item you want to change.

2.Press ENTER for adjustment mode.

3.Highlight the correct setting in the list. For the time

and date, use to change and to move. You can also enter digits for the time.

1.Highlight the item you want to change and press ENTER to display a list of settings.

2.Press to make a selection.

3.Press ENTER to return to the menu.

4.Highlight Done and press ENTER.

Menu Language

Highlight either English or Spanish and press ENTER to confirm your selection.

4.Press ENTER to confirm your entry and return to the Clock menu.

5.Highlight Done and press ENTER.

3D Mode

See page 13 for use of this menu.

RESET ALL

Sets all user-defined settings to the factory defaults and runs the initial guided setup. To prevent accidental use of RESET ALL, set a pass code (PIN) in the Locks menu. See page 24.

For assistance call 1(800) 332-2119