ZyXEL Communications 28641 My Login Name - Enter the login name given to you by your ISP

Figure 4-2 Menu 4 - Internet Access Setup

1.From the Main Menu, enter 4 to go to Menu 4 - Internet Access Setup as seen above.

2.ISP’s Name - Enter the name of your Internet Service Provider, e.g., myisp. This information is for identification purposes only.

3.ISP IP Addr - Enter the IP Address of the remote gateway at the ISP’s site. If you do not have this data, just leave it blank.

4.Pri(mary) Phone # and Sec(ondary) Phone Number - Both the Primary and the Secondary Phone number refer to the number that the Prestige will dial to connect to the ISP. The Prestige will always call your ISP using the Primary Phone number first. If the Primary Phone number is busy or does not answer, the Prestige will call the Secondary Phone number if available. Once connected, the Prestige will use the BACP (Bandwidth Allocation Control Protocol) to establish the second B-channel if PPP/MP is enabled, and the ISP also supports MP and BACP.

5.My Login Name - Enter the login name given to you by your ISP.

6.My Password - Enter the password associated with the login name above. Note that this login name/password pair is only for the Prestige to connect to the ISP’s gateway. When you use TCP/IP

44 Configuring for Internet Access