Accton Technology ES3528M-SFP manual Spanning Tree Commands, Show upnp

Spanning Tree Commands 4

Related Commands

upnp device ttl (4-216)

show upnp

This command displays the UPnP management status and time out settings.

Command Mode

Privileged Exec

Example

Console#show upnp
UPnP global settings:	Enabled
Status:
Advertise duration:	200
TTL:	20
Console#

Spanning Tree Commands

This section includes commands that configure the Spanning Tree Algorithm (STA) globally for the switch, and commands that configure STA for the selected interface.

Table 4-58 Spanning Tree Commands

Command	Function	Mode	Page
spanning-tree	Enables the spanning tree protocol	GC	4-218
spanning-tree mode	Configures STP, RSTP or MSTP mode	GC	4-219
spanning-tree forward-time	Configures the spanning tree bridge forward time	GC	4-220
spanning-tree hello-time	Configures the spanning tree bridge hello time	GC	4-221
spanning-tree max-age	Configures the spanning tree bridge maximum age	GC	4-221
spanning-tree priority	Configures the spanning tree bridge priority	GC	4-222
spanning-tree	Configures the path cost method for RSTP/MSTP	GC	4-222
path-cost method
spanning-tree	Configures the transmission limit for RSTP/MSTP	GC	4-223
transmission-limit
spanning-tree	Changes to MSTP configuration mode	GC	4-223
mst-configuration
mst vlan	Adds VLANs to a spanning tree instance	MST	4-224
mst priority	Configures the priority of a spanning tree instance	MST	4-225
name	Configures the name for the multiple spanning tree	MST	4-225
revision	Configures the revision number for the multiple spanning	MST	4-226
	tree
max-hops	Configures the maximum number of hops allowed in the	MST	4-226
	region before a BPDU is discarded

4-217