Accton Technology ES3528M-SFP Lldp dot3-tlv poe, Lldp medtlv extpoe, Syntax No lldp medtlv extpoe

LLDP Commands 4

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

Refer to “Frame Size Commands” on page 4-84for information on configuring the maximum frame size for this switch.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#lldp dot3-tlv max-frame

Console(config-if)#

lldp dot3-tlv poe

This command configures an LLDP-enabled port to advertise its Power-over-Ethernet (PoE) capabilities. Use the no form to disable this feature.

Syntax

[no] lldp dot3-tlv poe

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This option advertises Power-over-Ethernet capabilities, including whether or not PoE is supported, currently enabled, if the port pins through which power is delivered can be controlled, the port pins selected to deliver power, and the power class. Note that this device does not support PoE capabilities.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#lldp dot3-tlv poe

Console(config-if)#

lldp medtlv extpoe

This command configures an LLDP-MED-enabled port to advertise and accept Extended Power-over-Ethernet configuration and usage information. Use the no form to disable this feature.

Syntax

[no] lldp medtlv extpoe

4-207