Accton Technology ES3528M-SFP manual Aaa accounting commands

Authentication Commands 4

-radius - Specifies all RADIUS hosts configure with the radius-server host command described on page 4-95.

-tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server host command described on page 4-98.

-server-group - Specifies the name of a server group configured with the aaa group server command described on 4-102.(Range: 1-255 characters)

Default Setting

Accounting is not enabled

No servers are specified

Command Mode

Global Configuration

Command Usage

•This command runs accounting for Exec service requests for the local console and Telnet connections.

•Note that the default and method-namefields are only used to describe the accounting method(s) configured on the specified RADIUS or TACACS+ servers, and do not actually send any information to the servers about the methods to use.

Example

Console(config)#aaa accounting exec default start-stop group tacacs+ Console(config)#

aaa accounting commands

This command enables the accounting of Exec mode commands. Use the no form to disable the accounting service.

Syntax

aaaaccounting commands level {default method-name}start-stop group {tacacs+ server-group}

no aaa accounting commands level {default method-name}

•level - The privilege level for executing commands. (Range: 0-15)

•default - Specifies the default accounting method for service requests.

•method-name - Specifies an accounting method for service requests. (Range: 1-255 characters)

•start-stop- Records accounting from starting point and stopping point.

•group - Specifies the server group to use.

4-105