Accton Technology ES3528M-SFP manual Clock summer-time predefined, Australia

System Management Commands 4

Example

Console(config)#clock summer-time DEST date april 1 2007 23 23 april 23 2007 23 23 60

Console(config)#

Related Commands

show sntp (4-67)

clock summer-time (predefined)

This command configures the summer time (daylight savings time) status and settings for the switch using predefined configurations for several major regions of the world. Use the no form to disable summer time.

Syntax

clock summer-time name predefined [australia europe new-zealand usa]

no clock summer-time

•name - Name of the timezone while summer time is in effect, usually an acronym. (Range: 1-30 characters)

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

This command sets the summer-time time relative to the configured time zone. To display the time corresponding to your local time when summer-time is in effect, select the predefined summer-time time zone appropriate for your location, or manually configure summer-time if these predefined configurations do not apply to your location (see “clock summer-time (date)” on page 4-74or “clock summer-time (recurring)” on page 4-76).

Table 4-24 Predefined Summer-Time Parameters

Region	Start Time, Day, Week, & Month	End Time, Day, Week, & Month	Rel. Offset
Australia	00:00:00, Sunday, Week 5 of October	23:59:59, Sunday, Week 5 of March	60 min
Europe	00:00:00, Sunday, Week 5 of March	23:59:59, Sunday, Week 5 of October	60 min
New Zealand	00:00:00, Sunday, Week 1 of October	23:59:59, Sunday, Week 3 of March	60 min
USA	02:00:00, Sunday, Week 2 of March	02:00:00, Sunday, Week 1 of November	60 min

Example

Console(config)#clock summer-time MESZ predefined europe

Console(config)#

4-75