3 Configuring the Switch

CLI – This example configures MAC authentication for port 1.

Console(config)#interface ethernet 1/1

 

Console(config-if)#network-access mode mac-authentication

4-121

Console(config-if)#network-access max-mac-count 10

4-122

Console(config-if)#mac-authentication max-mac-count 24

4-123

Console(config-if)#network-access dynamic-vlan

4-124

Console(config-if)#network-access dynamic-qos

4-124

Console(config-if)#network-access guest-vlan

4-125

Console(config-if)#network-access link-detection

4-125

Console(config-if)#network-access link-detection link-up action trap4-126

Console(config-if)#end

 

Console#show network-access interface

ethernet 1/1

Global secure port information

 

Reauthentication Time

: 1800

--------------------------------------------------

--------------------------------------------------

Port : 1/1

 

MAC Authentication

: Enabled

MAC Authentication Intrusion action

: Block traffic

MAC Authentication Maximum MAC Counts

: 1024

Maximum MAC Counts

: 2048

Dynamic VLAN Assignment

: Enabled

Dynamic QoS Assignment

: Enabled

Guest VLAN

: Enabled

Link Detection

: Enabled

Detection Mode

: Link-up

Detection Action

: Trap

Console#

 

Configuring Port Link Detection

The Port Link Detection feature can send an SNMP trap and/or shut down a port when a link event occurs.

Command Attributes

Port – Indicates the port being configured.

Status – Configures whether Link Detection is enabled or disabled for a port.

Condition – The link event type which will trigger the port action.

-Link Up – Only link up events will trigger the port action.

-Link Down – Only link down events will trigger the port action.

-Link Up and Down – All link up and link down events will trigger the port action.

Action – The switch can respond in three ways to a link up or down trigger event.

-Trap – An SNMP trap is sent.

-Trap and Shutdown – An SNMP trap is sent and the port is shut down.

-Shutdown – The port is shut down.

Trunk – Indicates if the port is a trunk member.

3-96

Page 146
Image 146
Accton Technology ES3528M-SFP Configuring Port Link Detection, CLI This example configures MAC authentication for port