UPnP Commands

4-215

4
UPnP Commands
Universal Plug and Play (UPnP) is a set of protocols that allows devices to connect
seamlessly and simplifies the deployment of home and office networks. UPnP
achieves this by issuing UPnP device control protocols designed upon open,
Internet-based communication standards.

upnp device

This command enables UPnP on the device. Use the no form to disable UPnP.
Syntax
[no] upnp device}
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
You must enable UPnP before you can configure time out settings for sending of
UPnP messages.
Example
In the following example, UPnP is enabled on the device.
Related Commands
upnp device ttl (4-216)
upnp device advertise duration (4-216)
Table 4-1. UPnP Commands
Command Function Mode Page
upnp device Enables/disables UPnP on the network GC 4-215
upnp device ttl Sets the time-to-live (TTL) value. GC 4-216
upnp device advertise
duration
Sets the advertisement duration of the device GC 4-216
show upnp Displays UPnP status and parameters PE 4-217
Console(config)#upnp device
Console(config)#