Accton Technology ES3528M-SFP manual Displaying Port Members of Multicast Services

3 Configuring the Switch

• Port or Trunk – Specifies the interface attached to a multicast router.

Web – Click IGMP Snooping, Static Multicast Router Port Configuration. Specify the interfaces attached to a multicast router, indicate the VLAN which will forward all the corresponding multicast traffic, and then click Add. After you have finished adding interfaces to the list, click Apply.

Figure 3-133 Static Multicast Router Port Configuration

CLI – This example configures port 1 as a multicast router port within VLAN 1.

Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/14-296Console(config)#exit

Console#show ip igmp snooping mrouter vlan 14-296VLAN M'cast Router Port Type

---------------------- -------

1Eth 1/1 Static

Console#

Displaying Port Members of Multicast Services

You can display the port members associated with a specified VLAN and multicast service.

Command Attributes

•VLAN ID – Selects the VLAN for which to display port members. (Range: 1-4093)

•Multicast IP Address – The IP address for a specific multicast service.

•Multicast Group Port List – Shows the interfaces that have already been assigned to the selected VLAN to propagate a specific multicast service.

3-218