Accton Technology ES3528M-SFP manual Private Vlan Commands Function Mode

VLAN Commands 4

Table 4-65 Private VLAN Commands

Command	Function	Mode	Page
private-vlan association	Associates a community VLAN with a primary VLAN	VC	4-256
Configure Private VLAN Interfaces
switchport mode	Sets an interface to host mode or promiscuous mode	IC	4-257
private-vlan
switchport private-vlan	Associates an interface with a secondary VLAN	IC	4-258
host-association
switchport private-vlan	Associates an interface with an isolated VLAN	IC	4-258
isolated
switchport private-vlan	Maps an interface to a primary VLAN	IC	4-259
mapping
Display Private VLAN Information
show vlan private-vlan	Shows private VLAN information	NE,	4-259
		PE

To configure primary/secondary associated groups, follow these steps:

1.Use the private-vlancommand to designate one or more community VLANs and the primary VLAN that will channel traffic outside of the community groups.

2.Use the private-vlan association command to map the community VLAN(s) to the primary VLAN.

3.Use the switchport mode private-vlancommand to configure ports as promiscuous (i.e., having access to all ports in the primary VLAN) or host (i.e., community port).

4.Use the switchport private-vlan host-association command to assign a port to a secondary VLAN.

5.Use the switchport private-vlan mapping command to assign a port to a primary VLAN.

6.Use the show vlan private-vlancommand to verify your configuration settings.

To configure isolated VLANs, follow these steps:

1.Use the private-vlancommand to designate an isolated VLAN that will contain a single promiscuous port and one or more isolated ports.

2.Use the switchport mode private-vlancommand to configure one port as promiscuous (i.e., having access to all ports in the isolated VLAN) one or more ports as host (i.e., isolated port).

3.Use the switchport private-vlan isolated command to assign a port to an isolated VLAN.

4.Use the show vlan private-vlancommand to verify your configuration settings.

4-255