Accton Technology ES3528M-SFP manual Ip igmp profile, Syntax No ip igmp filter Default Setting

4 Command Line Interface

ip igmp filter (Global Configuration)

This command globally enables IGMP filtering and throttling on the switch. Use the no form to disable the feature.

Syntax

[no] ip igmp filter

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

•IGMP filtering enables you to assign a profile to a switch port that specifies multicast groups that are permitted or denied on the port. An IGMP filter profile can contain one or more, or a range of multicast addresses; but only one profile can be assigned to a port. When enabled, IGMP join reports received on the port are checked against the filter profile. If a requested multicast group is permitted, the IGMP join report is forwarded as normal. If a requested multicast group is denied, the IGMP join report is dropped.

•IGMP filtering and throttling only applies to dynamically learned multicast groups, it does not apply to statically configured groups.

•The IGMP filtering feature operates in the same manner when MVR is used to forward multicast traffic.

Example

Console(config)#ip igmp filter

Console(config)#

ip igmp profile

This command creates an IGMP filter profile number and enters IGMP profile configuration mode. Use the no form to delete a profile number.

Syntax

[no] ip igmp profile profile-number

profile-number- An IGMP filter profile number. (Range: 1-4294967295)

Default Setting

Disabled

Command Mode

Global Configuration

4-298