Accton Technology ES3528M-SFP manual Displaying Switch Hardware/Software Versions, Main Board, 153

		Basic Configuration
			3
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5		4-28
Console(config)#snmp-server location WC 9		4-153
Console(config)#snmp-server contact Ted		4-153
Console(config)#exit
Console#show system	: ES3528M-SFP	4-82
System description
System OID string	: 1.3.6.1.4.1.259.8.1.4
System information	: 0 days, 0 hours, 14 minutes, and 32.93 seconds
System Up time
System Name	: R&D 5
System Location	: WC 9
System Contact	: Ted
MAC address	: 00-00-35-28-10-03
Web server	: enabled
Web server port	: 80
Web secure server	: enabled
Web secure server port : 443
Telnet server	: enable
Telnet port	: 23
Jumbo Frame	: Disabled
POST result
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Fan Speed Test ............... PASS
Done All Pass.
Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version numbers for the main board and management software, as well as the power status of the system.

Field Attributes

Main Board

•Serial Number – The serial number of the switch.

•Number of Ports – Number of built-in RJ-45 ports.

•Hardware Version – Hardware version of the main board.

•Internal Power Status – Displays the status of the internal power supply.

Management Software

•EPLD Version – Version number of the Electronically Programmable Logic Device code.

•Loader Version – Version number of loader code.

•Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.

•Operation Code Version – Version number of runtime code.

•Role – Shows that this switch is operating as Master or Slave.

3-13