Accton Technology ES3528M-SFP manual Event Logging Commands, Logging on

	System Management Commands		4
Event Logging Commands
	Table 4-18 Event Logging Commands
Command	Function	Mode	Page
logging on	Controls logging of error messages	GC	4-55
logging history	Limits syslog messages saved to switch memory based on	GC	4-56
	severity
logging host	Adds a syslog server host IP address that will receive logging	GC	4-57
	messages
logging facility	Sets the facility type for remote logging of syslog messages	GC	4-57
logging trap	Limits syslog messages saved to a remote server based on	GC	4-58
	severity
clear logging	Clears messages from the logging buffer	PE	4-58
show logging	Displays the state of logging	PE	4-59
show log	Displays log messages	PE	4-60

logging on

This command controls logging of error messages, sending debug or error messages to switch memory. The no form disables the logging process.

Syntax

[no] logging on

Default Setting

None

Command Mode

Global Configuration

Command Usage

The logging process controls error messages saved to switch memory. You can use the logging history command to control the type of error messages that are stored.

Example

Console(config)#logging on

Console(config)#

Related Commands

logging history (4-56) clear logging (4-58)

4-55