Accton Technology ES3528M-SFP manual Displaying Lldp Local Device Information

3 Configuring the Switch

CLI – This example sets the interface to both transmit and receive LLDP messages, enables SNMP trap messages, enables MED notification, and specifies the TLV, MED-TLV, dot1-TLV and dot3-TLV parameters to advertise.

Console(config)#interface ethernet 1/1	4-166
Console(config-if)#lldp admin-status tx-rx	4-199
Console(config-if)#lldp notification	4-199
Console(config-if)#lldp medNotification	4-200
Console(config-if)#lldp basic-tlv port-description	4-201
Console(config-if)#lldp basic-tlv system-description	4-202
Console(config-if)#lldp basic-tlv management-ip-address	4-201
Console(config-if)#lldp basic-tlv system-name	4-203
Console(config-if)#lldp basic-tlv system-capabilities	4-202
Console(config-if)#lldp medtlv extPoe	4-207
Console(config-if)#lldp medtlv inventory	4-208
Console(config-if)#lldp medtlv location	4-208
Console(config-if)#lldp medtlv med-cap	4-209
Console(config-if)#lldp medtlv network-policy	4-209
Console(config-if)#lldp dot1-tlv proto-ident	4-203
Console(config-if)#lldp dot1-tlv proto-vid	4-204
Console(config-if)#lldp dot1-tlv pvid	4-204
Console(config-if)#lldp dot1-tlv vlan-name	4-205
Console(config-if)#lldp dot3-tlv link-agg	4-205
Console(config-if)#lldp dot3-tlv mac-phy	4-206
Console(config-if)#lldp dot3-tlv max-frame	4-206
Console(config-if)#lldp dot3-tlv poe	4-207
Console(config-if)#

Displaying LLDP Local Device Information

Use the LLDP Local Device Information screen to display information about the switch, such as its MAC address, chassis ID, management IP address, and port information.

Web – Click LLDP, Local Information.

Figure 3-112 LLDP Local Device Information

3-186