Accton Technology ES3528M-SFP manual Dot1x system-auth-control, Dot1x default

	Authentication Commands		4
Table 4-35 802.1X Port Authentication (Continued)
Command	Function	Mode	Page
dot1x operation-mode	Allows single or multiple hosts on an dot1x port	IC	4-115
dot1x re-authenticate	Forces re-authentication on specific ports	PE	4-115
dot1x re-authentication	Enables re-authentication for all ports	IC	4-116
dot1x timeout quiet-period	Sets the time that a switch port waits after the Max	IC	4-116
	Request Count has been exceeded before attempting to
	acquire a new client
dot1x timeout re-authperiod	Sets the time period after which a connected client must	IC	4-117
	be re-authenticated
dot1x timeout tx-period	Sets the time period during an authentication session that	IC	4-117
	the switch waits before re-transmitting an EAP packet
dot1x intrusion-action	Sets the port response to intrusion when authentication	IC	4-118
	fails
show dot1x	Shows all dot1x related information	PE	4-118

dot1x system-auth-control

This command enables 802.1X port authentication globally on the switch. Use the no form to restore the default.

Syntax

[no] dotx system-auth-control

Default Setting

Disabled

Command Mode

Global Configuration

Example

Console(config)#dot1x system-auth-control

Console(config)#

dot1x default

This command sets all configurable dot1x global and port settings to their default values.

Command Mode

Global Configuration

Example

Console(config)#dot1x default

Console(config)#

4-113