Accton Technology ES3528M-SFP manual 114, 116, 117

3 Configuring the Switch

CLI – This example sets the 802.1X parameters on port 2. For a description of the additional fields displayed in this example, see “show dot1x” on page 4-118.

Console(config)#interface ethernet 1/2					4-166
Console(config-if)#dot1x port-control auto					4-114
Console(config-if)#dot1x re-authentication					4-116
Console(config-if)#dot1x max-req 5					4-114
Console(config-if)#dot1x timeout quiet-period 30					4-116
Console(config-if)#dot1x timeout re-authperiod 1800					4-117
Console(config-if)#dot1x timeout tx-period 40					4-117
Console(config-if)#dot1x intrusion-action guest-vlan					4-118
Console(config-if)#exit
Console(config)#exit
Console#show dot1x					4-118
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name	Status		Operation Mode	Mode	Authorized
1/1	disabled		Single-Host	ForceAuthorized	n/a
1/2	enabled		Single-Host	auto	yes
.
.
.	disabled		Single-Host	ForceAuthorized	n/a
1/28
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Enable
reauth-period:		1800
quiet-period:		30
tx-period:		40	30
supplicant-timeout:
server-timeout:		10
reauth-max:		2
max-req:		5	Authorized
Status
Operation mode			Single-Host
Max count			5
Port-control			Auto
Supplicant			00-12-CF-49-5e-dc
Current Identifier			3
Intrusion action			Guest VLAN
Authenticator State Machine
State			Authenticated
Reauth Count			0
Backend State Machine
State			Idle
Request Count			0
Identifier(Server)			2
Reauthentication State Machine
State			Initialize
.
.
.
802.1X is disabled on port 1/28

Console#

3-86