Accton Technology ES3528M-SFP manual Aaa accounting exec, Command Usage Example

4 Command Line Interface

-radius - Specifies all RADIUS hosts configure with the radius-server host command described on page 4-95.

-tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server host command described on page 4-98.

-server-group - Specifies the name of a server group configured with the aaa group server command described on 4-102.(Range: 1-255 characters)

Default Setting

Accounting is not enabled

No servers are specified

Command Mode

Global Configuration

Command Usage

Note that the default and method-namefields are only used to describe the accounting method(s) configured on the specified RADIUS or TACACS+ servers, and do not actually send any information to the servers about the methods to use.

Example

Console(config)#aaa accounting dot1x default start-stop group radius Console(config)#

aaa accounting exec

This command enables the accounting of requested Exec services for network access. Use the no form to disable the accounting service.

Syntax

aaaaccounting exec {default method-name}start-stop group {radius tacacs+ server-group}

no aaa accounting exec {default method-name}

•default - Specifies the default accounting method for service requests.

•method-name - Specifies an accounting method for service requests. (Range: 1-255 characters)

•start-stop- Records accounting from starting point and stopping point.

•group - Specifies the server group to use.

4-104