Accton Technology ES3528M-SFP manual Match, Show class map, Class Map Configuration

4 Command Line Interface

•The class map is used with a policy map (page 4-275)to create a service policy (page 4-278)for a specific interface that defines packet classification, service tagging, and bandwidth policing.

Example

This example creates a class map call “rd_class,” and sets it to match packets marked for DSCP service value 3:

Console(config)#class-map rd_class match-any

Console(config-cmap)#match ip dscp 3

Console(config-cmap)#

Related Commands

show class map (4-279)

match

This command defines the criteria used to classify traffic. Use the no form to delete the matching criteria.

Syntax

[no] match {access-list acl-nameip dscp dscp ip precedence ip-precedencevlan vlan}

•acl-name- Name of the access control list. Any type of ACL can be specified, including standard or extended IP ACLs and MAC ACLs. (Range: 1-16 characters)

•dscp - A DSCP value. (Range: 0-63)

•ip-precedence- An IP Precedence value. (Range: 0-7)

•vlan - A VLAN. (Range:1-4092)

Default Setting

None

Command Mode

Class Map Configuration

Command Usage

•First enter the class-mapcommand to designate a class map and enter the Class Map configuration mode. Then use the match command to specify the fields within ingress packets that must match to qualify for this class map.

•Only one match command can be entered per class map.

Example

This example creates a class map called “rd_class#1,” and sets it to match packets marked for DSCP service value 3:

Console(config)#class-map rd_class#1_ match-any

Console(config-cmap)#match ip dscp 3

Console(config-cmap)#

4-274