Accton Technology ES3528M-SFP manual Displaying Lacp Port Counters, Field Description

3 Configuring the Switch

CLI – The following example configures LACP parameters for ports 1-4. Ports 1-4 are used as active members of the LAG.

Console(config)#interface ethernet 1/1			4-166
Console(config-if)#lacp actor system-priority 3			4-183
Console(config-if)#lacp actor admin-key 120			4-184
Console(config-if)#lacp actor port-priority 128			4-186
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/4
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#show lacp sysid		System MAC Address	4-186
Port Channel	System Priority

-------------------------------------------------------------------------

1	3	00-12-CF-31-31-31
2	32768	00-12-CF-31-31-31
3	32768	00-12-CF-31-31-31
4	32768	00-12-CF-31-31-31

Console#show	lacp 1 internal	4-186
Port channel	: 1

-------------------------------------------------------------------------

Oper Key : 120

Admin Key : 0 Eth 1/1

-------------------------------------------------------------------------

LACPDUs Internal:		30 sec
LACP System Priority:		3
LACP	Port Priority:	128
Admin Key:		120
Oper	Key:	120

Admin State : defaulted, aggregation, long timeout, LACP-activity

Oper State:	distributing, collecting, synchronization,
.	aggregation, long timeout, LACP-activity
.
.

Displaying LACP Port Counters

You can display statistics for LACP protocol messages.

	Table 3-8 LACP Port Counters
Field	Description
LACPDUs Sent	Number of valid LACPDUs transmitted from this channel group.
LACPDUs Received	Number of valid LACPDUs received on this channel group.
Marker Sent	Number of valid Marker PDUs transmitted from this channel group.
Marker Received	Number of valid Marker PDUs received by this channel group.

3-120