Accton Technology ES3528M-SFP manual Lldp dot1-tlv vlan-name, No lldp dot1-tlv vlan-name

LLDP Commands 4

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

The port’s default VLAN identifier (PVID) indicates the VLAN with which untagged or priority-tagged frames are associated (see “switchport native vlan” on page 4-247).

Example

Console(config)#interface ethernet 1/1

Console(config-if)#no lldp dot1-tlv pvid

Console(config-if)#

lldp dot1-tlv vlan-name

This command configures an LLDP-enabled port to advertise its VLAN name. Use the no form to disable this feature.

Syntax

[no] lldp dot1-tlv vlan-name

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This option advertises the name of all VLANs to which this interface has been assigned. See “switchport allowed vlan” on page 4-248and “protocol-vlanprotocol-group (Configuring VLANs)” on page 4-262.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#no lldp dot1-tlv vlan-name

Console(config-if)#

lldp dot3-tlv link-agg

This command configures an LLDP-enabled port to advertise link aggregation capabilities. Use the no form to disable this feature.

Syntax

[no] lldp dot3-tlv link-agg

4-205