Accton Technology ES3528M-SFP manual Whichboot, Boot system, Syntax whichboot unit

4 Command Line Interface

whichboot

This command displays which files were booted when the system powered up.

Syntax whichboot [unit]

unit - Stack unit. (Range: 1)

Default Setting

None

Command Mode

Privileged Exec

Example

This example shows the information displayed by the whichboot command. See the table under the dir command for a description of the file information displayed by this command.

Console#whichboot	file type	startup size (byte)
file name
Unit1:-------------------------------------	--------------	------- -----------
	Boot-Rom image	Y	214124
D2218
V2271	Operation Code	Y	1761944
Factory_Default_Config.cfg	Config File	Y	5197
Console#

boot system

This command specifies the image used to start up the system.

Syntax

boot system [unit:] {boot-romconfig opcode}: filename

The type of file or image to set as a default includes:

•boot-rom* - Boot ROM.

•config* - Configuration file.

•opcode* - Run-time operation code.

•filename - Name of the configuration file or code image.

•unit* - Specifies the unit number. (Range: 1)

* The colon (:) is required.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•A colon (:) is required after the specified unit number and file type.

•If the file contains an error, it cannot be set as the default file.

4-90