Accton Technology ES3528M-SFP manual 167, 171, 168, 170, 169

Port Configuration 3

(Default: Autonegotiation enabled; Advertised capabilities for 100BASE-FX – 100full; 1000BASE-T – 10half, 10full, 100half, 100full, 1000full; 1000BASE-SX/ LX/LH – 1000full)

•Media Type – Media type used for the combo ports. (Options: Coppper-Forced,

SFP-Forced, or SFP-Preferred-Auto; Default: SFP-Preferred-Auto)

•Trunk – Indicates if a port is a member of a trunk. To create trunks and select port members, see “Creating Trunk Groups” on page 3-114.

Notes: 1. Auto-negotiation must be disabled before you can configure or force the interface to use the Speed/Duplex Mode or Flow Control options.

2.1000full operation cannot be forced. The Gigabit Combo ports can only operate at 1000full when auto-negotiation is enabled.

Web – Click Port, Port Configuration or Trunk Configuration. Modify the required interface settings, and click Apply.

Figure 3-73 Port/Trunk Configuration

CLI – Select the interface, and then enter the required settings.

Console(config)#interface ethernet 1/13	4-166
Console(config-if)#description RD SW#13	4-167
Console(config-if)#shutdown	4-171
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation	4-168
Console(config-if)#speed-duplex 100half	4-167
Console(config-if)#flowcontrol	4-170
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half	4-169
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol

3-113