Accton Technology ES3528M-SFP manual Aaa accounting update, Minute

4 Command Line Interface

-tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server host command described on page 4-98.

-server-group - Specifies the name of a server group configured with the aaa group server command described on 4-102.(Range: 1-255 characters)

Default Setting

Accounting is not enabled

No servers are specified

Command Mode

Global Configuration

Command Usage

•The accounting of Exec mode commands is only supported by TACACS+ servers.

•Note that the default and method-namefields are only used to describe the accounting method(s) configured on the specified TACACS+ server, and do not actually send any information to the server about the methods to use.

Example

Console(config)#aaa accounting commands 15 default start-stop group tacacs+

Console(config)#

aaa accounting update

This command enables the sending of periodic updates to the accounting server. Use the no form to disable accounting updates.

Syntax

aaaaccounting update [periodic interval] no aaa accounting update

interval - Sends an interim accounting record to the server at this interval. (Range: 1-2147483647 minutes)

Default Setting

1 minute

Command Mode

Global Configuration

Command Usage

•When accounting updates are enabled, the switch issues periodic interim accounting records for all users on the system.

•Using the command without specifying an interim interval enables updates, but does not change the current interval setting.

4-106