System Management Commands 4

ip ssh timeout

This command configures the timeout for the SSH server. Use the no form to restore the default setting.

Syntax

ip ssh timeout seconds no ip ssh timeout

seconds – The timeout for client response during SSH negotiation. (Range: 1-120)

Default Setting

10 seconds

Command Mode

Global Configuration

Command Usage

The timeout specifies the interval the switch will wait for a response from the client during the SSH negotiation phase. Once an SSH session has been established, the timeout for user input is controlled by the exec-timeoutcommand for vty sessions.

Example

Console(config)#ip ssh timeout 60

Console(config)#

Related Commands

exec-timeout(4-15) show ip ssh (4-52)

ip ssh authentication-retries

This command configures the number of times the SSH server attempts to reauthenticate a user. Use the no form to restore the default setting.

Syntax

ip ssh authentication-retries count no ip ssh authentication-retries

count – The number of authentication attempts permitted after which the interface is reset. (Range: 1-5)

Default Setting

3

Command Mode

Global Configuration

4-49

Page 345
Image 345
Accton Technology ES3528M-SFP manual Ip ssh timeout, Ip ssh authentication-retries, Exec-timeout4-15 show ip ssh