Accton Technology ES3528M-SFP manual 55 802.1X Port Configuration

User Authentication 3

•Re-authentication Period – Sets the time period after which a connected client must be re-authenticated. (Range: 1-65535 seconds; Default: 3600 seconds)

•Tx Period – Sets the time period during an authentication session that the switch waits before re-transmitting an EAP packet. (Range: 1-65535; Default: 30 seconds)

•Intrusion Action – Sets the port’s response to a failed authentication.

-Block Traffic – Blocks all non-EAP traffic on the port. (This is the default setting.)

-Guest VLAN – All traffic for the port is assigned to a guest VLAN. The guest VLAN must be separately configured (See “Creating VLANs” on page 3-161)and mapped on each port (See “Configuring MAC Authentication for Ports” on page 3-94).

•Authorized – Displays the 802.1X authorization status of connected clients.

-Yes – Connected client is authorized.

-No – Connected client is not authorized.

-Blank – Displays nothing when dot1x is disabled on a port.

•Supplicant – Indicates the MAC address of a connected client.

•Trunk – Indicates if the port is configured as a trunk port.

Web – Click Security, 802.1X, Port Configuration. Modify the parameters required, and click Apply.

Figure 3-55 802.1X Port Configuration

3-85