Accton Technology ES3528M-SFP TACACS+ Client, Tacacs-server host, Tacacs Commands Function Mode

4 Command Line Interface

Example

Console#show radius-server
Remote RADIUS server configuration:
Global settings
Communication key with RADIUS server:
Server port number:	1812
Retransmit times:	2
Request timeout:	5
Sever 1:
Server IP address: 192.168.1.1
Communication key with RADIUS server: *****
Server port number: 1812
Retransmit times:	2
Request timeout: 5
Console#

TACACS+ Client

Terminal Access Controller Access Control System (TACACS+) is a logon authentication protocol that uses software running on a central server to control access to TACACS-aware devices on the network. An authentication server contains a database of multiple user name/password pairs with associated privilege levels for each user or group that require management access to a switch.

Table 4-32 TACACS Commands

Command	Function	Mode	Page
tacacs-server host	Specifies the TACACS+ server	GC	4-98
tacacs-server port	Specifies the TACACS+ server network port	GC	4-99
tacacs-server key	Sets the TACACS+ encryption key	GC	4-99
tacacs-server retransmit	Sets the number of retries	GC	4-100
tacacs-server timeout	Sets the interval before resending an authentication request	GC	4-100
show tacacs-server	Shows the current TACACS+ settings	GC	4-101

tacacs-server host

This command specifies the TACACS+ server. Use the no form to restore the default.

Syntax

[no] tacacs-serverindex host {host_ip_address} [port port_number] [timeout timeout] [retransmit retransmit] [key key]

•index - Specifies the index number of the server. (Range: 1)

•host_ip_address - IP address of the server.

•port_number - The TACACS+ server TCP port used for authentication messages. (Range: 1-65535)

4-98