Multicast VLAN Registration 3

MVR Running Status – Indicates whether or not all necessary conditions in the MVR environment are satisfied.

MVR VLAN – Identifier of the VLAN that serves as the channel for streaming multicast services using MVR. (Range: 1-4093; Default: 1)

MVR Group IP – IP address for an MVR multicast group. The IP address range of

224.0.0.0to 239.255.255.255 is used for multicast streams. MVR group addresses cannot fall within the reserved IP multicast address range of 224.0.0.x. (Range:

224.0.1.0- 239.255.255.255; Default: no groups are assigned to the MVR VLAN)

Count – The number of contiguous MVR group addresses. (Range: 1-255;

Default: 0)

Web – Click MVR, Configuration. Enable MVR globally on the switch, select the MVR VLAN, add the multicast groups that will stream traffic to attached hosts, and then click Apply.

Figure 3-139 MVR Global Configuration

CLI – This example first enables IGMP snooping, enables MVR globally, and then configures a range of MVR group addresses.

Console(config)#ip igmp snooping

4-288

Console(config)#mvr

4-304

Console(config)#mvr group 228.1.23.1 10

4-304

Console(config)#

 

Displaying MVR Interface Status

You can display information about the interfaces attached to the MVR VLAN.

Field Attributes

Type – Shows the MVR port type.

Oper Status – Shows the link status.

3-227

Page 277
Image 277
Accton Technology ES3528M-SFP manual Displaying MVR Interface Status, 304