Accton Technology ES3528M-SFP manual Ip igmp max-groups, Syntax No ip igmp filter profile-number

4 Command Line Interface

Command Mode

IGMP Profile Configuration

Command Usage

Enter this command multiple times to specify more than one multicast address or address range for a profile.

Example

Console(config)#ip igmp profile 19

Console(config-igmp-profile)#range 239.1.1.1

Console(config-igmp-profile)#range 239.2.3.1 239.2.3.100

Console(config-igmp-profile)#

ip igmp filter (Interface Configuration)

This command assigns an IGMP filtering profile to an interface on the switch. Use the no form to remove a profile from an interface.

Syntax

[no] ip igmp filter profile-number

profile-number- An IGMP filter profile number. (Range: 1-4294967295)

Default Setting

None

Command Mode

Interface Configuration

Command Usage

•The IGMP filtering profile must first be created with the ip igmp profile command before being able to assign it to an interface.

•Only one profile can be assigned to an interface.

•A profile can also be assigned to a trunk interface. When ports are configured as trunk members, the trunk uses the filtering profile assigned to the first port member in the trunk.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#ip igmp filter 19

Console(config-if)#

ip igmp max-groups

This command sets the IGMP throttling number for an interface on the switch. Use the no form to restore the default setting.

Syntax

ip igmp max-groups number no ip igmp max-groups

4-300