Accton Technology ES3528M-SFP manual Server, Aaa accounting dot1x, No server index ip-address

Authentication Commands 4

Example

Console(config)#aaa group server radius tps

Console(config-sg-radius)#

server

This command adds a security server to an AAA server group. Use the no form to remove the associated server from the group.

Syntax

[no] server {index ip-address}

•index - Specifies the server index. (Range: RADIUS 1-5, TACACS+ 1)

•ip-address - Specifies the host IP address of a server.

Default Setting

None

Command Mode

Server Group Configuration

Command Usage

•When specifying the index already be defined by the

•When specifying the index already be defined by the

for a RADIUS server, that server index must radius-server host command (see page 4-95). for a TACACS+ server, that server index must tacacs-server host command (see page 4-98).

Example

Console(config)#aaa group server radius tps

Console(config-sg-radius)#server 10.2.68.120

Console(config-sg-radius)#

aaa accounting dot1x

This command enables the accounting of requested 802.1X services for network access. Use the no form to disable the accounting service.

Syntax

aaaaccounting dot1x {default method-name}start-stop group {radius tacacs+ server-group}

no aaa accounting dot1x {default method-name}

•default - Specifies the default accounting method for service requests.

•method-name - Specifies an accounting method for service requests. (Range: 1-255 characters)

•start-stop- Records accounting from starting point and stopping point.

•group - Specifies the server group to use.

4-103