Accton Technology ES3528M-SFP manual Configuring Igmp Filtering and Throttling for Interfaces, 299

Multicast Filtering 3

Web – Click IGMP Snooping, IGMP Filter Profile Configuration. Select the profile number you want to configure; then click Query to display the current settings. Specify the access mode for the profile and then add multicast groups to the profile list. Click Apply.

Figure 3-137 IGMP Profile Configuration

CLI – This example configures profile number 19 by setting the access mode to “permit” and then specifying a range of multicast groups that a user can join. The current profile configuration is then displayed.

Console(config)#ip igmp profile 19	4-298
Console(config-igmp-profile)#permit	4-299
Console(config-igmp-profile)#range 239.1.2.3	4-299
Console(config-igmp-profile)#range 239.2.3.1 239.2.3.200
Console(config-igmp-profile)#end
Console#show ip igmp profile 19	4-302
IGMP Profile 19
permit

range	239.1.2.3	239.1.2.3
range	239.2.3.1	239.2.3.200

Console#

Configuring IGMP Filtering and Throttling for Interfaces

Once you have configured IGMP profiles, you can assign them to interfaces on the switch. Also you can set the IGMP throttling number to limit the number of multicast groups an interface can join at the same time.

Command Usage

• Only one profile can be assigned to an interface.

3-223