Accton Technology ES3528M-SFP manual System Status Commands, Show startup-config

4 Command Line Interface

System Status Commands

Table 4-25 System Status Commands

Command	Function	Mode	Page
show startup-config	Displays the contents of the configuration file (stored in flash	PE	4-78
	memory) that is used to start up the system
show running-config	Displays the configuration data currently in use	PE	4-79
show system	Displays system information	NE, PE	4-82
show users	Shows all active console and Telnet sessions, including user	NE, PE	4-82
	name, idle time, and IP address of Telnet clients
show version	Displays version information for the system	NE, PE	4-83

show startup-config

This command displays the configuration file stored in non-volatile memory that is used to start up the system.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•Use this command in conjunction with the show running-configcommand to compare the information in running memory to the information stored in non-volatile memory.

•This command displays settings for key command modes. Each mode group is separated by “!” symbols, and includes the configuration mode command, and corresponding commands. This command displays the following information:

-SNMP community strings

-Users (names and access levels)

-VLAN database (VLAN ID, name and state)

-VLAN configuration settings for each interface

-IP address configured for the switch

-Spanning tree settings

-Any configured settings for the console port and Telnet

4-78