Accton Technology ES3528M-SFP manual Lldp basic-tlv management-ip-address

LLDP Commands 4

Example

Console(config)#interface ethernet 1/1

Console(config-if)#lldp mednotification

Console(config-if)#

lldp basic-tlv management-ip-address

This command configures an LLDP-enabled port to advertise the management address for this device. Use the no form to disable this feature.

Syntax

[no] lldp basic-tlv management-ip-address

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•The management address protocol packet includes the IPv4 address of the switch. If no management address is available, the address should be the MAC address for the CPU or for the port sending this advertisement.

•The management address TLV may also include information about the specific interface associated with this address, and an object identifier indicating the type of hardware component or protocol entity associated with this address. The interface number and OID are included to assist SNMP applications to perform network discovery by indicating enterprise specific or other starting points for the search, such as the Interface or Entity MIB.

•Since there are typically a number of different addresses associated with a Layer 3 device, an individual LLDP PDU may contain more than one management address TLV.

•Every management address TLV that reports an address that is accessible on a port and protocol VLAN through the particular port should be accompanied by a port and protocol VLAN TLV that indicates the VLAN identifier (VID) associated with the management address reported by this TLV.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#lldp basic-tlv management-ip-address

Console(config-if)#

lldp basic-tlv port-description

This command configures an LLDP-enabled port to advertise its port description. Use the no form to disable this feature.

4-201