Table of Contents
1 | Connector Specifications | 3 | |
| 1.1 | RJ45 Connector | 3 |
| 1.2 | DC Iris Lens Connector | 4 |
| 1.3 | 4 | |
| 1.3.1 Equivalent Circuit for the Input Pin of the I/O Connector | 6 |
2 | Camera Output Timing Charts | .............................................................................................................................7 | ||
| 2.1 | Horizontal Timing | 7 | |
| 2.2 | Vertical Timing | 7 | |
| 2.2.1 | Full Scanning | 7 | |
| 2.2.2 | 1/2 Partial Scanning | 8 | |
| 2.2.3 | 1/4 Partial Scanning | 8 | |
| 2.2.4 AOI (Area of Interest) | 9 | ||
| 2.3 | Pixel Transferring Image | 10 |
3 | Camera Operational Modes | 11 | |
| 3.1 | Normal Mode | 11 |
| 3.2 | Pulse Width Trigger Mode | 11 |
| 3.2.1 Timing | 11 | |
| 3.2.2 Exposure Timing with the Positive Polarity Trigger Signal | 12 | |
| 3.2.3 Exposure Timing with the Negative Polarity Trigger Signal | 12 | |
| 3.3 | Edge Preset Trigger Mode | 13 |
| 3.3.1 Timing | 13 | |
| 3.3.2 Exposure Timing with the Positive Polarity Trigger Signal | 14 | |
| 3.3.3 Exposure Timing with the Negative Polarity Trigger Signal | 14 | |
| 3.4 | Edge Preset Trigger Mode (Trigger Input While the Image Is Out) | 15 |
| 3.4.1 Timing | 15 | |
| 3.4.2 Exposure Timing with the Positive Polarity Trigger Signal | 16 | |
| 3.4.3 Exposure Timing with the Negative Polarity Trigger Signal | 16 | |
| 3.5 | H Reset Mode | 17 |
4 | Communication Protocol | 18 | |
| 4.1 | Communication Method | 18 |
| 4.2 | Communication Settings | 18 |
| 4.3 | Communication Format | 18 |
| 4.4 | Camera Control Command | 21 |
| 4.4.1 Camera Command List (Device Code: 000000) | 21 | |
| 4.4.2 Camera Command List (Device Code: 100000) | 23 | |
| 4.4.3 Descriptions of the Camera Control Commands (Device code: 000000); | 25 | |
| 4.4.4 Descriptions of the Camera Commands (Device code: 100000); | 31 | |
| 4.5 | GenICam Command / Camera Command Reference Table | 35 |
2/38 | ||
User’s Guide Rev. 1.02 | ||
|